TWINSTAR DIFFUSER “NEW STYLE” (MADE OF HIGH QUALITY ACRYLIC) – Large (24mm)
The Twinstar “NewStyle” diffuser uses ultra fineporosity ceramic stone toproduce super fine bubbles.It generates smallerMicro-bubbles for improved CO2 distribution and will last longer in the water, which increases its carbon dioxide solubility efficiency.
Itis made of high qualityacrylic with transparencylike glass, while retainhigher impact strength than glass for better shatter resistance. Therefore it is noteasily tocrack like other cheaply made glass diffusers when separating from the aquarium forcleaning. With the unique ceramic stone and Acrylic bonding technologies, they are durableenough to withstand high pressure for extended reliability.
TWINSTAR Diffuser “New Style” productcatalog
Various sizes available (Small, Medium, Large) for tanks ranging from 20L/5 gallons up to 250L/65 gallons.
- Microspore ceramic stoneproduces ultra fine bubbles.
- Micro-bubbles will last longer in the water, increasing its dioxide solubility efficiency.
- Transparent acrylicdesign &Shatter-proof.
- Unique ceramic stone and acrylic bonding technologies that is durable enoughto withstandCO2 system’shigh pressure.
- Compact and light weight design.
- CO2 is key to photosynthesis and a healthy planted aquarium.
| Size |
Diameter |
AquariumSize |
|
Small
|
15mm |
5~10 gallons (20~40L) |
|
Medium
|
19mm |
10~30 gallons (40L~120L) |
| Large |
24mm |
30~65 gallons (120L~250L) |
Directions
Rinse diffuser with warm water. Attach suction cup and desired tubing (Compatible with 6 mm (1/4″) – Standard Airline Tubing) to the diffuser.
To attach tubing to diffuser, wet the inside of the tubing with water at the attachment point and carefully slide tubing over diffuser stem. To avoid breakage when removing tubing, do not pull tubing off of diffuser. Instead, cut tubing carefully along the attachment length to release the diffuser.
Mount your diffuser using the suction cup(s). It should be positioned low in the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the diffuser stem to avoid breakage.
Install check valve (not included) inline with tubing outside of the aquarium
Once securely mounted, turn on CO2. Observe bubble count and adjust CO2 to desired flow rate.
Reviews
There are no reviews yet.