MistKing is renowned for their ultra high quality, high performance terrarium misting systems which are used by professionals and hobbyists worldwide. What sets mistking apart from other mistking systems its extremely fine mist, wide range of accessories and robust, long lasting pump and parts.

Despite their reputation and popularity, owning a mistking system is still affordable due to the starter model which incorporates all the essentials you need to get going whilst being fully upgradable as and when you need it to be.

Ultimate and Advanced systems are also available depending on your needs, to help you decide which model is right for you we have broken down a summary of each model:

Starter

The kit that gets you started. It contains all you need to mist a single enclosure whilst keeping all options for expansion firmly on the table as it can support up to 10 nozzles. Compatible with all 1/4″ mistking accessories.

• High Quality Pump (up to 10 nozzles)
• Power Adapter
• Digital Seconds Timer
• 1x “L” StyleMisting Assembly
• Reservoir Bulkhead with o-ring and plug
• 15 ft of 1/4″ tubing
• 5 tubing clips with screws
• Manual

Ultimate

When you want to step up the number of supplied accessories and purchase a system capable of running up to 20 nozzles. Compatible with all 1/4″ mistking accessories.

• Higher QualityPump (up to 20 nozzles)
• Power Adapter
• Digital Seconds Timer
• 3x “T” Style Misting Assemblies
• ZipDrip Valve (creates a dripless system)
• Reservoir Bulkhead with o-ring and plug
• 25 ft of 1/4″ tubing
• 1/4″ manual ball valve
• 10 tubing clips with screws
• Tubing cutter with collet toll
• T Connector
• L Connector
• Cable Y connector (for connecting the zipdrip valve and pump together to the timer)
• Manual

Advanced

Rather than a step up (the ultimate system would be the ‘top’ level system by any other standard) we suggest you think of the advanced as a slightly different type of system. With a 3/4″ backbone and a super powerful pump capable of pressuresup to 125psi, this system can be used in larger or more complex situations which include anywhere from 10 to 70+ nozzles. (MistKing do not recommend this system unless you are going to exceed 15-20 nozzles).

• Large Capacity diaphragm pump with 3/8″ fittings
• 24v Power Adapter
• Digital Seconds Timer
• 3/8″ metal reservoir bulkhead with plug
• 3/8″ Ball Valve
• 35 ft of 1/4″ tubing (to connect nozzles)
• 15ft of 3/8″ tubing (to connect reservoir to pump and run nozzle 3/8″ backbone)
• 12x “T” Misting assemblies
• 3x “L” misting assembles
• 2x Reducing teeConnections (3/8″ to 1/4″)
• 1x Reducing elbow Connection (3/8″ to 1/4″)
• 20x 1/4″ tubing clips
• 10x 3/8″ tubing clips
• Manual